Anilox Rollers

Line screen, volume, and cell geometry have to match the ink, the plate, and the work. A roll that is scored, plugged, or the wrong BCM will not print the file you approved.

The anilox is the metering roll in a flexo inking system. We quote new rolls and re-engraving to the specification you run, or the one the job needs — for example a 250 LPI / 7.0 BCM / 60° hex, or a slotted engraving when that is the cell geometry — along with the press type and whether the roll is a sleeve or a journaled roll.

An Anilox Halo is a custom-sized end boot that protects sleeve ends from chipping when rolls go in and out of racks and carts. Plants use Halo colors to distinguish line screens, so an operator can tell at a glance which roll is coming off the rack. Magnetic Halo hooks give you a press-side place to park the Halo while the roll is in the chamber or the cleaner, and they help identify which anilox is in which deck.

Pair Halos with FSC plastic roll covers when you want the face and the ends protected together. See Roll Covers for cover styles, and watch the Halo in use in the video below.

The lineup

Close view of an anilox or cylinder end

New anilox and re-engrave

Quoted by LPI, BCM, cell geometry, and press or sleeve size. Send the current spec, the ink, and what you’re printing if you want a recommendation rather than a straight match.

Orange Anilox Halo end boot on an anilox sleeve

Anilox Halo

Custom-sized end protection against chipping and damage in racks and carts, with colors used to identify line screen. Press-specific sizing is quoted to the sleeve.

Green Flexo Supply Anilox Halo hanging on a black magnetic hook

Halo hooks

Magnetic hooks for temporary press-side storage of the Halo and for identifying which anilox is in which chamber.

How to specify an anilox

  • Volume and screen BCM and LPI, plus the cell geometry (for example 60° hex or a slotted engraving).
  • The physical roll Sleeve or journaled roll, diameter, face length, and the press.
  • The work Ink system, solids versus process, and any known scoring or plugging.

Where this shows up on press

  • Dot gain and weak solids The wrong volume or a plugged roll will not lay the ink the plate was made for.
  • Scoring Once the ceramic is scored, that line can print for the rest of the roll’s life.
  • Chipped sleeve ends Ends take the hits in a rack. Halos exist to stop that damage.

Questions we get a lot

Do you only sell new rolls?

Not at all. Re-engraving is part of the same conversation when the base is still good.

Where do I see Halos used with covers?

Watch the Halo video below. For cover styles, and for how cover length is planned when you run Halos, see Roll Covers.

Anilox Halos and hooks

Halos are quoted to the sleeve — size, and a color if you want line screens identified at a glance. The magnetic hook parks the Halo at the deck and marks which chamber that roll is in.

Green Flexo Supply Anilox Halo hanging on a black magnetic hook
Anilox Halo on a magnetic hook. Colors are quoted to identify line screen.
Orange Anilox Halo end boot seated on an anilox sleeve
A Halo boot protecting a sleeve end.
Anilox sleeves standing in a plant with colored Halo end boots
Color-coded Halos on sleeve ends in the plant.

A few notes on care

Inspect rolls with a microscope after cleaning, not only by eye. Store them in covers, with Halos on sleeve ends, so the engraving and the ends aren’t the first thing a cart hits.

Request a quote

Share the plant, the sizes, and what you’re running. Our customer service team will follow up.

Request a quote Call (833) 353-9672