When a dirty anilox looks like a volume problem
Packed cells print like a smaller roll. Measure before you change the specification.
Industry news from FTA, Printing Impressions, and other trade sources, plus short, practical articles from Flexo Supply Company.
Short, practical articles on pressroom problems we help with, with new pieces on the first Tuesday of each month.
Packed cells print like a smaller roll. Measure before you change the specification.
Most anilox scoring is not a mystery. It is pressure, a worn edge, or a blade that does not belong in that chamber.
End seals exist so the blade can do its job. A leak is a seal problem until proven otherwise.
Plate lift, heavy solids, and process work that will not hold a dot are often a tape problem — not a press problem.
Repeat, base circle diameter, wall, and face length have to be right, or the plate will not land where the file says it should.
The mandrel stays in the press. The bridge is how you step up in diameter without a very thick plate sleeve.
In-the-round elastomer is not for every deck. It is a strong fit when the work is a flood coat or a repeating pattern.
A cover will not save a chipped sleeve end, and a Halo will not save an unprotected engraving. Use both.
A spray bottle will not open a packed high-line-screen roll. A laser in the plant is not the answer to every dirty anilox either.
Dirty ink and poorly mixed ink print like a process problem. Filtration and mixing are usually cheaper than a new anilox.
The latest flexo and packaging industry news.