Cleaning Solutions

A dirty anilox prints like a lower-volume roll. The right chemistry — used with a little discipline — opens the cells again without attacking the ceramic or the steel.

Keeping anilox cells open, breaking down UV and solvent inks, and getting plates and parts back in service is everyday pressroom work. We furnish chemistry we already sell into flexo plants, and we’ll source more when the ink or the soil calls for it.

Our cleaning partners include Flexo Wash, Trion (Yellow Magic), and others, and the products below are ones we currently furnish. When you need laser cleaning, send-away anilox cleaning, or an on-site visit, see Cleaning Equipment & Services.

The lineup

Flexo Wash Quick Treat applied to an anilox

Flexo Wash Quick Treat

A Flexo Wash manual cleaner for UV and solvent inks, sold as a quart with sprayer (six quarts per case) and as a one-gallon unit. It’s a press-side treatment — not a substitute for a scheduled deep clean.

Turbo Yellow Magic

Trion Yellow Magic

Trion is Yellow Magic — Turbo in 55-gallon drums and Yellow Magic 7 wipes, for the soils your crew actually fights. Ask us which pack size fits the way you clean.

TKM Enpurex 95 Plus

TKM Enpurex 95 Plus

An anilox roll cleaner we furnish in a 1-liter pack. Tell us the ink system and how you plan to apply it so we quote the right unit of measure.

Flexo Wash Handy parts washer

Washers and liquid systems

When the chemistry belongs in a washer rather than a spray bottle, we’ll look at Flexo Wash and other liquid-cleaning equipment as part of the same conversation.

How to choose cleaning chemicals

  • Name the ink UV, solvent, or water-based — and whether you are cleaning anilox, plates, or parts.
  • Name the method Manual spray, wipes, a parts washer, or a scheduled anilox soak. The product has to match the method.
  • Safety and soil Share SDS needs and how dirty the rolls actually are. A light press-side treat will not open a packed high-line-screen roll.

Where this shows up on press

  • Volume loss that is really dirt A 7.0 BCM roll that is half plugged prints like a much smaller roll. Density drops and you chase viscosity or impression.
  • Cleaning downtime The wrong chemistry means longer soaks, repeat washes, and rolls that still do not come clean.
  • Damaged inventory Aggressive methods on the wrong surface can pit ceramic or swell a plate. Match the product to the part.

Questions we get a lot

Who are your cleaning partners?

Flexo Wash, Trion (Yellow Magic), and more. The products we furnish today include Flexo Wash Quick Treat, Trion Yellow Magic, and TKM Enpurex.

Do you also clean anilox for us?

Yes — laser, send-away, and on-site cleaning are on the Cleaning Equipment & Services page.

Can you help with washer chemistry?

Yes. Tell us the washer and the inks, and we’ll quote chemistry that belongs in that machine.

A few notes on care

Follow the product directions and the SDS, and rinse as required so cleaner doesn’t dry in the cells. A press-side treat is for maintenance; packed rolls need a deeper process.

Cleaning Equipment & Services

Flexo Wash, Trion Yellow Magic, and more

We work with Flexo Wash, Trion (Yellow Magic), and additional cleaning specialists so you can match the chemistry — and, when needed, the equipment — to the inks and the soil in your pressroom.

Request a quote

Share the plant, the sizes, and what you’re running. Our customer service team will follow up.

Request a quote Call (833) 353-9672