Mounting Tapes

The tape is part of the print condition. Density, cushion, and adhesion have to match the plate, the sleeve or cylinder, and whether you’re printing solids, process, or both.

From plate-mounting tapes in a range of densities to adhesive transfer, flying-splice and splittable splice, masking, and double-coated specialty tapes, we quote the tapes a flexo or gravure plant actually runs. Prices are competitive, and lead times can be as fast as 24 hours.

Mounting tape is what holds the photopolymer plate to the sleeve or cylinder. If it’s too hard, too soft, or losing adhesion, you’ll see plate lift, heavy impression, bouncing solids, or process work that won’t hold a dot. The right conversation starts with the plate thickness, the sleeve or cylinder, and the work you’re printing.

Already have a series on the sleeve? Send it. We’ll quote that specification, or help you move to a better tape if plates are breaking down or the print isn’t what you signed off.

The lineup

Seven colored foam plate-mounting tape rolls on a steel bench

Plate-mounting tapes

Foam and film mounting tapes in the densities used for solids, process, and combination work. We’ll quote the thickness and the cushion to the plate and the print condition — a firmer tape for solids, a more compressible one when you need to protect the highlight dot.

Adhesive transfer tapes

Unsupported adhesive transfer tapes for splicing, holding, and converting steps that do not call for a foam carrier. Send the width, thickness, and the surfaces you are bonding.

Flying splice and process splice tapes

Flying-splice tapes, including splittable constructions used on unwind splices, and related process splice tapes. Tell us the web, the splice method, and the width you run.

Masking, packaging, and double-coated tapes

Masking tapes, light-duty packaging tapes, and double-coated film tapes for pressroom and converting use. If you have a part number or a sample of what you run today, send it.

How to specify tape

We quote these tapes at competitive prices, with lead times as fast as 24 hours.

  • Start with what is on the sleeve Send the series or a sample, the plate thickness, and whether the work is solids, process, or combination.
  • Name the surface Sleeve, cylinder, or a converting roller — and whether the plate is being mounted in a dedicated mounter.
  • Width and format Log width, slit width, and how many rolls you typically keep on the floor.
  • Splice method For flying or process splices, tell us the substrate, speed, and whether you need a splittable tape.

Where this shows up on press

  • Plate lift A tape that cannot hold through the ink and the impression cycle will lift at the edges and ruin the job.
  • Dot gain and heavy solids The wrong density prints like a press problem. Solids want a firmer cushion; process work often needs more forgiveness.
  • Waiting on tape A missed shipment stops the mounter. We quote with lead times as fast as 24 hours.

Questions we get a lot

Can you match the tape we already run?

Yes. Send a series or a sample, and we’ll quote the specification you run — or recommend a better tape if the print isn’t holding.

How fast can you ship?

Lead times can be as fast as 24 hours.

Do you only do mounting tape?

Not at all. Transfer, flying splice, masking, packaging, and double-coated tapes are part of the same conversation.

A few notes on care

Store rolls in a conditioned area, on end or as the manufacturer intends, and keep the liner clean. Old or heat-aged tape is a common cause of lift that gets blamed on the plate or the sleeve.

Request a quote

Share the plant, the sizes, and what you’re running. Our customer service team will follow up.

Request a quote Call (833) 353-9672