Storage & Efficiency

Flexopodz for the mounting room

Press performance is easy to measure. Mounting-room waste hides in searching, staging, damaged inventory, and floor space you never get back. As a Flexopodz partner, we help you plan the room and quote the system.

Your mounting room may be costing more than you think

Flexopodz systems are proudly manufactured in America and installed by a certified American installation team. SleevePodz are two-level shelving units that hold twice as many sleeves as conventional racks, bolted to the floor or set on mechanical-assist mobile carriages. Because the system is modular, it can be arranged and rearranged around your constraints.

Faster to press

When sleeves, plates, carts, and job materials are easy to find, work reaches the press sooner and the team spends less time chasing.

50%–80% more floorspace

Mobile storage, right-sized carts, and cleaner staging turn crowded mounting-room square footage back into productive plant capacity.

One system the team can trust

A cleaner system gives the team a consistent way to store, move, stage, and retrieve what the next job needs.

Request a Flexopodz quote

Sleeve storage

Start with vertical sleeve storage, movement, and staging. SleevePodz are a strong fit when inventory is spread across static shelves, congested aisles, or disconnected staging areas — and sleeves do not warp when they’re positioned vertically.

Flexopodz sleeve storage system

SleevePodz

Double your storage capacity without expanding your footprint. Recover capacity in the same mounting-room space while keeping sleeves staged vertically. Plants often see about 80 sleeves per SleevePodz, faster retrieval, and a path to roughly 80% more capacity after mobile storage.

Flexopodz sleeve storage

Mobile SleevePodz

Mobile SleevePodz keep sleeves vertical, organized, and ready to move on mechanical-assist floor tracks. The system opens a compact aisle only where the mounter needs access. Typical footprints are 3 ft × 4 ft or 3 ft × 8 ft.

Flexopodz plate storage

Static SleevePodz

Floor-bolted shelving that uses the same Podz logic, upgradeable to mobile later. The economic option when floorspace is not the first constraint and you want a lower-friction starting point.

Flexopodz cart

Single-Level 3×4 SleevePodz

One 3×4 SleevePodz format with mobile or static options. Built for heavy wide-web sleeves that need bottom-level access and a shorter beam span.

Flexopodz ink storage

Narrow Web Sleeve Storage

Dedicated sleeve storage for narrow-web inventory. Keep narrow-web sleeves vertical, visible, and movable in one organized storage unit.

Flexopodz sleeve storage system

SafetyPodz

A safer handling platform for heavy sleeve workflows: solid steel base, hole grid, and lift-assist compatible, with controlled clearance.

Plate storage

PlatePodz are built around your plate library. Shelves, boxes, and the Podz layout are matched to inventory so the library is easier to organize, track, and retrieve.

Flexopodz sleeve storage

PlatePodz

Flat-box plate storage on mobile carriages, planned around your plate library so every box has a location. Protects plate sets from ozone cracking, UV spider-web, embossing from over-stacking, and memory curl.

Flexopodz plate storage

Static PlatePodz

The most cost-effective flat-box PlatePodz storage. Floor-bolted shelving for plants that need organized protection before moving to a full mobile carriage system.

Flexopodz cart

AutoPlatePodz

A vertical-lift module that delivers the right tray to the mounter. Compresses plate inventory into a smaller footprint and cuts repeated searching and handling in high-volume rooms.

Carts

Carts keep sleeves, plates, ink, and anilox movement tied to the job instead of spread across the room.

Flexopodz ink storage

Lean Sleeve Cart

Compact sleeve staging for everyday mounting-room flow. Move complete sleeve sets between storage, mounting, press staging, and return. Adjustable poles on 1.5-inch spacing, locking swivel casters, and a compact 48" × 30" base.

Flexopodz sleeve storage system

Anilox Roller Cart

Move anilox rollers without touching the engraved surface. The roller rests on its ends and stays off tables, racks, and cart frames. Holds each roller in its own spot — typically 12 positions, sized to your rollers.

Flexopodz sleeve storage

Modular Narrow Web Job Cart

One mobile cart for narrow-web setup, changeover, and cleanup. Adjustable modular arms carry ink chambers, ink jugs, sleeves, or anilox rollers. Shelves double as drip trays.

Flexopodz plate storage

Mid Web Vertical Sleeve Cart

Warp-free, high-density sleeve staging in a compact footprint. Sleeves stay upright while moving between storage, mounting, and press, and can be wrapped to help protect mounted sleeves from ozone and light.

Flexopodz cart

Wide Web Vertical Sleeve Cart

The same vertical, no-warp approach sized for wide-web sleeves — high-density staging that stays movable and protected.

Flexopodz ink storage

Basic Horizontal Sleeve Cart

Reliable, practical sleeve transport for everyday pressroom flow. Welded sleeve poles, custom lengths, and 5-inch locking casters.

InkPodz

Heavy-duty mobile carriages for ink storage, so ink inventory lives in the same space and flow logic as the rest of the mounting room — especially useful when buckets consume floor space or add motion to changeover preparation.

Typical capacity is about 70 buckets per pod. The design is modular, expandable, and reconfigurable.

Flexopodz sleeve storage system

InkPodz

Heavy-duty mobile carriage storage for organized ink inventory.

FlexOpz software

FlexOpz fills ERP gaps without ripping anything out. It’s for teams that need job status, staging, and retrieval visibility without replacing existing business systems.

  • Real-time status — every job stage at a glance
  • Smart scheduling — auto-prioritized by due date and press
  • Light-to-pick retrieval — guides staff to the right sleeve

It supports mounting-room workflow, retrieval guidance, and return housekeeping so the room isn’t run from memory, sticky notes, or repeated questions.

Flexopodz sleeve storage

FlexOpz

Job-status, scheduling, and light-to-pick retrieval software for the mounting room.

Floor planning and as-built scan

The As-Built Digital Twin Scan captures your mounting department as it really is — equipment, clearances, aisles, and workflows — so you can plan changes with confidence.

The plant is scanned on site: walls, columns, presses, and real clearances. You get a precise model you can open in Revit to measure, test clearances, and even move equipment around before you commit. The floor plan can also be dropped into the Plant Floor Planner to lay out storage.

Use it when you’re planning a change and need the real floor, not a guess, before capital is committed.

Request a walkthrough or scan

Flexopodz plate storage

As-Built Floorplan

A measured digital twin of your mounting department for layout planning.

Tax incentives

Put your storage upgrade to work at tax time

Flexopodz sleeve and plate storage, carts, InkPodz, and FlexOpz software can make the plateroom and pressroom faster and more organized. Under current federal law, they may also let you write off the entire purchase in the year you put it to work, not over several years.

Section 179 expensing

$2.56M

2026 limit for electing to expense qualifying equipment and off-the-shelf software. It phases out dollar for dollar once total qualifying purchases exceed $4.09M. The deduction cannot exceed your taxable business income.

Bonus depreciation

100%

Made permanent by the 2025 One, Big, Beautiful Bill Act for qualified property acquired and placed in service after January 19, 2025. There is no dollar cap, and it is not limited to taxable income.

Standard 5-year MACRS

20%

Year-one rate under the half-year convention for 5-year property. Without expensing, you recover the cost gradually over six tax years instead of deducting it all up front.

FlexOpz software

36 mo.

Purchased off-the-shelf software qualifies for Section 179 and bonus depreciation. If you do not expense it, you amortize it straight-line over 36 months. Subscription (SaaS) fees are generally treated as an ordinary business expense instead.

What a Flexopodz system could save you in year one

Illustrative estimate

System investment Sec. 179 / 100% bonus first-year deduction Year-one federal tax savings @ 21% Standard 5-yr MACRS year-one deduction MACRS year-one tax savings @ 21% Extra first-year tax savings
$50,000 $50,000 $10,500 $10,000 $2,100 +$8,400
$250,000 $250,000 $52,500 $50,000 $10,500 +$42,000
$750,000 $750,000 $157,500 $150,000 $31,500 +$126,000
$1,500,000 $1,500,000 $315,000 $300,000 $63,000 +$252,000

Assumptions: C-corporation at the 21% federal rate. Equipment placed in service in 2026 and fully eligible. MACRS uses the 200% declining-balance method with the half-year convention for 5-year property (20%). If more than 40% of your year’s equipment is placed in service in Q4, the mid-quarter convention applies and drops year-one 5-year MACRS to 5%, which makes expensing even more valuable. Total deductions over the asset’s life are the same either way. Expensing moves them up front. State taxes, pass-through rates, and financing are not included.

The clock runs out December 31

Buying it is not enough. It has to be placed in service — installed and ready for its assigned use — by your tax year-end (December 31 for calendar-year companies). Equipment that arrives or is installed in January counts toward next year’s taxes. Bonus depreciation also requires the equipment to be acquired after January 19, 2025; a binding contract signed before that date disqualifies it. Allow time for lead time, delivery, and setup.

Indiana note

Indiana does not fully follow these federal rules. For Indiana tax purposes, Section 179 is limited to $25,000, and the state does not conform to federal bonus depreciation. Confirm the current treatment with your CPA.

Talk to a specialist

Request a Flexopodz quote Download the tax savings sheet (PDF)

Not tax advice. The information here is for general guidance only and is not tax, legal, or accounting advice. Figures are illustrative estimates based on federal rules as of November 2026 (IRC §§179 and 168(k) as amended by Pub. L. 119-21; Rev. Proc. 2025-32; IRS Notice 2026-11; IRS Pub. 946). Your actual results depend on your entity type, tax bracket, taxable income, total purchases, asset classification, financing, state conformity, and other factors. Many states, including Indiana, do not fully follow federal bonus depreciation or Section 179 limits. Consult your tax professional before you make a purchase decision. Flexo Supply Company does not provide tax advice.

Protect what sits in the rack

Flexopodz carts and racks are built around sleeve, plate, and anilox inventory. Anilox ends take a beating going in and out of those racks — we supply custom Anilox Halos to protect the ends, and roll covers for storage and transit. Color-coded halos can also mark line screen so the right roll comes off the rack.

If you also move gravure cylinders, tell us the diameters, face lengths, and how they are stored today. We will quote handling from the inventory you actually have rather than assume a standard cylinder rack.

Flexopodz in the room

Flexopodz is our partner for this Storage & Efficiency line. Custom carts sourced through Titus are a separate page.

Custom Carts Request a Flexopodz quote