Plate Cutters

A safer, faster, and more accurate way to cut flexographic plates — on the flat, with a sightline, instead of cutting on the round with a knife.

As a close Keencut partner on the Flexo Plate Cutter, we quote whole machines and parts — including the 64-inch and 84-inch sizes we have furnished — and we can take an order or a purchase order through this site.

Keencut’s Flexo Plate Cutter is designed so you cut flexo on the flat, using a sightline strip, rather than cutting a plate on the cylinder. A dual head produces a beveled overlapping join or a 5° undercut so the edges meet correctly on the cylinder, which helps prevent ink traps and adhesive failure at the join.

Pre-set depths are held in color-coded magnetic cartridges. Keencut publishes maximum depths of 5 mm (3/16") for the bevel, 10 mm (3/8") for a 5° undercut with a trapezoidal blade, and 8 mm (5/16") with a rectangular blade. The head uses a spring-loaded bevel/undercut holder, ball and thrust bearings, stainless tracks, and hardened steel ball-track rollers on a one-piece aluminum extrusion with self-aligning rollers. Keencut offers a five-year guarantee when the product is registered.

The lineup

Keencut Flexo Plate Cutter

Keencut Flexo Plate Cutter

Complete units in five cut lengths: 18", 32", 50", 64", and 84". Built to cut plates on the flat with a controlled bevel or undercut join.

Keencut Flexo Plate Cutter cutting head

Heads, blades, and parts

Replacement parts, blades, and cartridges to keep a machine already in the plateroom in service. Send the machine size and the part you need.

Order or submit a PO

Use the order form to request a unit or parts. We’ll confirm availability, freight, and payment terms — purchase order, credit card, or ACH — before the order is accepted.

What to include with an order

  • Machine or parts Use the model code when you can (for example FPC64, FLH, or CA50-019). If you are ordering a complete cutter, include the cut length. For parts, send the machine size and the part you need.
  • Plant and dock Ship-to plant, any dock constraints, and when you need the machine on the floor.
  • Payment A PO number, or a note that you prefer credit card or ACH.

Where this shows up on press

  • Unsafe hand cuts Cutting plates with a utility knife is how people get hurt and how joins go wrong.
  • Ink traps at the join A poor bevel or undercut leaves a gap or an overlap that holds ink and can lift the plate.
  • Wasted plates and reruns A bad cut means a new plate, a missed window, and a mounter waiting.

Questions we get a lot

How do I order a cutter?

Submit an order or a purchase order on the order form. We’ll confirm availability, freight, and payment terms before the order is accepted.

Do you sell parts as well as whole units?

Yes. Send the machine size and the part description, or a Keencut part reference.

Are prices listed here?

Yes. The prices below are Flexo Supply’s current selling prices. Freight is additional and confirmed with your order.

A few notes on care

Register the machine with Keencut to activate the guarantee. Keep the track clean, use the correct cartridge and blade for the cut, and store spare blades so the edge is protected.

Prices

Here are Flexo Supply Company’s current selling prices for the Keencut Flexo Plate Cutter models and parts we quote most often. Freight is additional and confirmed with your order.

Flexo Plate Cutters

CodeDescriptionPrice
FPC18Flexo Plate Cutter, 46 cm / 18"$2,032
FPC32Flexo Plate Cutter, 81 cm / 32"$2,326
FPC50Flexo Plate Cutter, 127 cm / 50"$2,607
FPC64Flexo Plate Cutter, 163 cm / 64"$2,750
FPC84Flexo Plate Cutter, 214 cm / 84"$3,034

Flexo Plate Cutter accessories, blades, and parts

CodeDescriptionPrice
FLHLift and hold system for Flexo Plate Cutter$177
FSASquaring arm for Flexo Plate Cutter$381
SF01-003Complete head assembly$1,689
SU21-002Undercarriage$329
CA50-017Tech D .012 blades, box of 100$103.50
CA50-020Tech D .015 blades, box of 100$103.50
CA50-021Tech S .012 blades, box of 100$103.50
CA50-030Tech S .015 blades, box of 100$103.50
CA50-019Medium duty blades, box of 100$52.83
SILTPHeat-resistant tape, 9 m$242

Prices are Flexo Supply Company’s current selling prices. Freight is additional and confirmed with your order. Other Flexo Plate Cutter parts and accessories can be quoted — send the code or a description.

Order or submit a PO

Keencut

This line is a close partnership with Keencut. For a demonstration or a parts question, start with an order request or a quote.

Request a quote

Share the plant, the sizes, and what you’re running. Our customer service team will follow up.

Request a quote Call (833) 353-9672