Mounting tape is part of the print condition
Plate lift, heavy solids, and process work that will not hold a dot are often a tape problem — not a press problem.
The mounting tape is the cushion between the plate and the sleeve or cylinder — thickness, density, and adhesive. When any of those is wrong for the job, the print will tell you, and it will often look like something else.
A tape that is too soft for solids can bounce and print a heavy, uneven solid. A tape that is too hard for process work will not forgive the highlight dot, and you will chase impression or ink to compensate. A tape that has lost adhesion — aged in a hot room, or asked to hold a thick plate through a solvent it cannot take — will lift at the edges. The operator sees a plate problem. The mounter sees a sleeve problem. The tape was the specification that did not match the work.
Start with what is already on the sleeve: the series if you have it, the plate thickness, and whether the job is solids, process, or a combination. We quote mounting tapes, transfer tapes, flying-splice and process-splice tapes, and the everyday masking and double-coated tapes a plant also runs — at competitive prices, with lead times as fast as 24 hours when the item can move that quickly.
Send a sample or a series if you need a match, and store rolls the way they were meant to be stored. Old tape is a common cause of lift that gets blamed on the plate.