When an anilox is scored, the line can print for the rest of the roll’s life. Crews often see it first as a streak they cannot wipe out, then as a ceramic face with a mark you can catch with a fingernail. By then the damage is done.
The doctor blade is usually in the story. A blade that is too hard for the duty, loaded crooked, or left in the chamber long after the edge is gone will wipe the land and then cut it. So will a crew that tightens the blade to hide a leaking end seal. The chamber was designed for a given thickness, width, and edge — change one of those without changing the others, and a “quick fix” becomes a re-engrave.
In gravure the same physics apply: the blade doctors the cylinder, and a worn or cocked edge will not wipe the land cleanly. The difference is the surface you are trying to protect. In both cases, specify the blade to the ink and the abrasion, change it on a schedule, and don’t use blade pressure as a substitute for a seal that fits.
If you already have a thickness, width, length, and edge profile that works, send it. Matching what you run is faster than starting from a catalog page. If what you run is scoring rolls, that is the time to talk about material and edge, and about what is happening at the ends of the chamber.